Washing Machine PCB Repair in GTB Nagar, Delhi

Looking for reliable washing machine PCB repair in GTB Nagar, Delhi? Refix India Repairing Services diagnoses and repairs complex washing machine PCB (circuit board) faults right at your doorstep within 60 minutes. Consequently, there is absolutely no need to unplug your heavy appliance or carry your machine anywhere. Backed by 15+ years of industry experience and over 56,000+ successful repairs completed, we proudly back every single job with a 30-day workmanship warranty.

15+ yrs

Experience

100+

Technicians

56,000+

Repairs Completed

30-day

Service Guarantee

Call +91 9711779066
Book Repair in 30 Seconds
Technician repairing a washing machine PCB circuit board at a home in GTB Nagar, Delhi
Common TV Problems We Fix

Signs Your Washing Machine PCB Needs Repair

If your washing machine shows any of these symptoms, the PCB (main control board) is often the cause — not the motor or drum.

Won't start

The machine doesn't respond at all, even though the power supply is fine.

Blank or frozen display

Control panel lights stay off, freeze mid-cycle, or flicker on and off.

Random restarts

The wash cycle stops midway, or the machine restarts on its own.

Buttons not responding

Pressing buttons does nothing, or the wrong wash cycle starts.

Repeated error codes

The same fault code returns even after unplugging and resetting the machine.

Burning smell near the panel

A burning odour or visible scorch marks around the control area.

Not sure it’s the PCB? Call +91 9711779066 and describe the fault — our technician will confirm before any repair begins.

What Is a Washing Machine PCB, and Why Does It Fail?

The Printed Circuit Board (PCB)—also commonly called the main motherboard—acts as the absolute “brain” of your washing machine. Specifically, it reads every button press, accurately times the wash cycles, and directly controls the motor, water inlet valve, heater, and drain pump. Therefore, when it fails, your entire machine can appear completely dead, even though the physical motor and drum are perfectly fine.

Common causes of PCB damage

  • Voltage fluctuations and power surges — common during Delhi’s peak summer load

  • Water seepage into the control panel area

  • Loose or corroded wiring connections

PCB vs. Motor Fault

A motor fault usually shows physical signs — humming, jamming, or a burning smell from underneath the machine. A PCB fault usually shows electrical signs instead — no response, wrong cycles, a dead display, or error codes. Our technician confirms which one it is on-site before quoting any repair.

Our Process

Our Washing Machine PCB Repair Process

Our transparent four-step washing machine PCB repair process in GTB Nagar ensures fast doorstep diagnostics, component-level fixing, live calibration testing, and instant activation of your 30-day protected service warranty.

01

Inspection

Our technician inspects your washing machine’s PCB on-site and shares a clear, itemised repair estimate.

02

Your approval

Work begins only after you approve the estimate — no surprise charges added later.

03

Repair

The fault is fixed on the spot wherever possible; genuine components are arranged the same day if needed.

04

30-day warranty

Every repair is backed by a 30-day workmanship warranty.

Brands We Rrpair

Washing Machine Brands We Repair

Our technicians repair PCBs across all major washing machine brands sold in India, including:

Samsung

LG

Whirlpool

IFB

Bosch

Haier

Godrej

Panasonic

Voltas Beko

Videocon

*Don’t see your brand? Call +91 9711779066 — we service most other brands on request.

Washing Machine PCB Repair Cost in GTB Nagar

Typical price ranges for washing machine PCB repair in Delhi NCR – your Refix India technician confirms the exact price for your machine after inspection, before any work begins.

Repair Type

Typical price range

Visit & diagnosis
often adjusted against your final repair bill

₹200 – ₹400
Minor component repair
fuse, relay, sensor, wiring

₹500 – ₹1,200
Major PCB repair
multiple components, control chip

₹1,200 – ₹2,500
Full PCB replacement
board damaged beyond repair

₹2,500 – ₹6,000+

₹500 onwards

Typical starting price for a minor PCB repair — confirmed after on-site inspection

Ranges vary by brand — inverter and fully-automatic boards (Samsung, LG, Whirlpool) generally cost more to source than basic semi-automatic boards.

Your final washing machine PCB repair price in GTB Nagar depends on a few things our technician checks during the visit:

  • Brand and model
    Import and inverter boards typically cost more to source than standard domestic boards.
  • The specific fault
    A single faulty component (relay, fuse, capacitor) costs less to fix than full board damage.
  • Spare part availability
    Older or discontinued models can affect part cost and turnaround time.
  • Repair vs. replacement
    We always try to repair the existing board first — it's faster and cheaper than replacing it.

You’ll see the price in writing before any repair work starts — book a visit and our technician will inspect the fault and confirm the exact cost on-site.

Refix India

Best PCB Repair Expert in GTB Nagar

Refix India specialises specifically in PCB (circuit board) repair for TVs, ACs, refrigerators and washing machines — not general handyman work — which means our technicians see far more circuit-board faults than a typical multi-service repair company.

15+ Years

Experience

Repairing TV, AC, refrigerator and washing machine PCBs across Delhi NCR.

100+ Expert

Technicians

A trained team dedicated to circuit-board-level diagnosis, not just part-swapping.

56,000+

Repairs completed

A track record built one doorstep visit at a time.

Within 60 - Min

Service available

Most GTB Nagar bookings are attended within 60 minutes.

Wide

Delhi NCR coverage

Serving GTB Nagar and the wider Delhi NCR region.

30-Day

Service warranty

On workmanship for every repair we complete.

Areas We Cover

Washing Machine PCB Repair Near Me — Areas We Cover Around GTB Nagar

Refix India provides doorstep washing machine PCB repair in GTB Nagar (110009) and the surrounding localities, close to GTB Nagar Metro Station on the Yellow Line:

  • Mukherji Nagar
  • Model Town
  • Kingsway Camp
  • Kamla Nagar
  • Vijay Nagar
  • Shakti Nagar
  • Kalyan Vihar
  • Roop Nagar
  • Civil Lines
  • Timarpur
  • Azadpur
  • Burari

Outside these areas? We also cover wider Delhi NCR — Call +91 9711779066 to confirm service at your location.

Service Terms

What's Covered in Washing Machine Repair Cost in GTB Nagar

  • What's included
  • On-site inspection and diagnosis
  • Written estimate before work begins
  • PCB-level repair using quality components
  • 30-day workmanship warranty
  • Not Included
  • Cost of spare parts
  • Panel replacement charges
  • Physical or liquid damage
  • Accessories replacement
     

Washing Machine PCB Not Working?

Book a doorstep visit in GTB Nagar today — most technicians arrive within 60 minutes.

Accurate diagnosis
Cost-effective repair
Long-lasting performance
Get Expert Diagnosis Today
Call Now

Frequently Asked Questions

The PCB (Printed Circuit Board), also called the main board or circuit board, is the washing machine’s control centre — it manages the motor, water valves, heater and display. Common signs of PCB failure include the machine not starting, random restarts, a blank or frozen display, unresponsive buttons, or repeated error codes even after a power reset.

Washing machine PCB repair in GTB Nagar typically starts from ₹500 for a minor component repair and can range up to ₹6,000 or more for a full PCB replacement, depending on the brand and fault. Refix India shares a written estimate after an on-site inspection, before any repair work begins.

Yes. Refix India offers same-day, doorstep washing machine PCB repair across GTB Nagar and nearby areas, with technicians typically reaching within 60 minutes of a confirmed booking.

Refix India repairs PCBs for Samsung, LG, Whirlpool, IFB, Bosch, Haier, Godrej, Panasonic and most other major brands sold in India, across top-load, front-load, semi-automatic and fully automatic models.

Wherever possible, our technicians repair the faulty component on your existing board, which is faster and cheaper than a full replacement. If the board is damaged beyond repair — for example burnt tracks or water damage — we explain why a replacement is needed before doing any work.

Every washing machine PCB repair from Refix India carries a 30-day service warranty covering workmanship. This warranty does not cover the cost of spare parts, panel replacement charges, physical or liquid damage, or accessories replacement.

Refix India brings 15+ years of appliance repair experience, a 100+ member technician team and 56,000+ completed repairs, with a specific specialisation in PCB (circuit board) repair for TVs, ACs, refrigerators and washing machines rather than general handyman work.

Call or WhatsApp +91 9711779066 , or use the booking buttons on this page. Our team confirms a technician visit slot in GTB Nagar the same day.